Fox Factory Performance Series 2.0 Coil-Over QS3 Shocks Polaris Ranger 1000 Crew 2017-2026
$1,399.99
Genuine Fox Factory suspension & frame component. VEHICLE SPECIFIC. In stock, ships from USA. Part of the Suspension & Frame catalog at CG ATV & UTV Parts Shop.
Fox Factory Performance Series 2.0 Coil-Over QS3 Shocks Polaris Ranger 1000 Crew 2017-2026
Product Overview
Fox Factory Performance Series 2.0 Coil-Over QS3 Shocks Polaris Ranger 1000 Crew 2017-2026
Fox Factory Performance Series 2.0 Coil-Over QS3 Shocks Polaris Ranger 1000 Crew
The FOX Performance Series 2.0 Podium QS3 shock kit is designed as a direct replacement for your UTV or Side-by-Side’s original shocks and springs. This kit features an internal floating piston (IFP) system within the piggyback reservoirs, which prevents the gas charge from mixing with the shock oil. This separation ensures that the oil maintains its viscosity, providing consistent damping control even under demanding conditions like washboards, rocks, and large dips.
The system uses a combination of single-rate front springs and dual-rate rear springs to maintain comfort while preventing bottoming out at high speeds on rough terrain. This setup allows for smooth trail riding, comparable to stock performance, while handling more aggressive situations without issue.
The Quick Switch 3-position compression damping adjustment lets you easily adapt the shocks to different riding conditions. Set the QS3 to setting 1 for a softer ride on smoother trails or during rock crawling. Setting 2 offers a firmer response for carrying additional passengers or gear. Setting 3 provides maximum bottom-out protection for high-speed activities like jumping dunes or racing through the desert.
In addition to enhanced performance, the FOX Podium 2.0 QS3 shocks are built for durability, featuring hard-anodized aluminum bodies and reservoirs that resist corrosion, 5/8-inch hard chromed shafts for smooth operation and longer seal life, and are fully rebuildable. This ensures you can repair or customize them for specific riding applications, providing long-term peace of mind.
Features:
- Sold as a pair
- High-flow velocity-sensitive damping
- Fully re-buildable and re-valvable
- Ultra-durable bottom-out bumper
- 2.0” Type III hard-anodized aluminum body and reservoir
- 5/8” hard-chromed shaft
- Standard or Heavy-Duty spring rate
- Adjustable spring load
- Adjustments / Technical Information:
- Front Extended Length: 23.07
- Front Compressed Length: 15.95
- Front Travel: 7.12
- Rear Extended Length: 23.07
- Rear Compressed Length: 15.95
- Rear Travel: 7.12
- Top Mount: Eyelet
- Bottom Mount: Eyelet
- Reservoir: Piggyback
Note: Replaces Fox Factory Part Number: N/A
Part Numbers
| Product Style | RevZilla Item # | Store Sku | MFR. Product # | Availability |
|---|---|---|---|---|
| Front | 10437076 | 885-06-138-4 | Only 3 Left: Ships next business day | |
| Rear | 10437077 | 885-06-139-4 | Only 2 Left: Ships next business day |
Key Specifications
| Attribute | Detail |
|---|---|
| Brand | Fox Factory |
| SKU / MPN | 885-06-138-4 |
| Category | Suspension & Frame > Shock Absorbers |
| Condition | New |
| Availability | In Stock — Ships 1–3 Business Days |
| Price | USD $1399.99 |
Fitment & Compatibility
VEHICLE SPECIFIC
Need help confirming fit? Our technical staff can help at our contact page.
Installation & Use
Installation complexity varies by application. For most bolt-on components, a basic socket set, torque wrench, and the vehicle’s service manual are sufficient. If you need detailed torque specs or wiring diagrams, refer to the manufacturer’s documentation or consult an authorized service center.
OEM-replacement parts should be installed following factory service intervals. Aftermarket performance parts may require additional setup, such as tuning or calibration — always verify compatibility before installation.
Browse our full Suspension & Frame catalog for complementary components and upgrade packages.
Safety Standards & Compliance
All products listed on this store are sourced from authorized distributors and meet applicable SAE and ANSI standards where relevant. Electrical components comply with UL requirements for powersports applications. Brake components sold here meet or exceed OEM friction specifications as independently verified by the manufacturer.
For regulatory standards governing off-road vehicle components, refer to the SAE International standards library and the U.S. Consumer Product Safety Commission.
Related Categories
Frequently Asked Questions
- Is the Fox Factory Performance Series 2.0 Coil-Over QS3 Shocks Polaris Ranger 1000 Crew 2017-2026 compatible with my vehicle?
This product is designed for specific fitment. VEHICLE SPECIFIC Please check the part numbers table below or contact our support team at https://cgatvandutvpartsshop.com/contact for a fitment check before ordering.
- What is the warranty on this Fox Factory product?
Fox Factory products are backed by the manufacturer’s standard limited warranty against defects in materials and workmanship. For full warranty details, visit https://cgatvandutvpartsshop.com/warranty-policy.
- Do you ship internationally?
We currently ship to all 50 US states with fast fulfillment from our warehouses. For international shipping inquiries, contact us at https://cgatvandutvpartsshop.com/contact.
- What is your return policy?
We accept returns within 30 days of delivery on unused, uninstalled items in original packaging. See full details at https://cgatvandutvpartsshop.com/returns.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Progressive 512 Recon Shock Rear Honda Recon TRX250 1997-2020
Baja Designs S8 Series Shock Mount Can-Am Maverick X3 2017-2021
EPI Performance Heavy Duty Rear Suspension Spring
Fox Factory 3.20″ Universal Shock Spanner Wrench
Eibach ETFX2.5 Shock Wrench Can-Am / Polaris / Yamaha 2016-2026
Quad Boss Upper A-Arm Repair Kit Kawasaki Teryx / Teryx 4 800 2014-2020
High Lifter Spring Adapter Plates Polaris 2011-2022
Reviews
There are no reviews yet.