Shock Absorbers
Flatten harsh trail whoops, maintain tire-to-ground contact over jagged rocks, and control violent chassis body roll with high-performance ATV and UTV shock absorbers and adjustable coilover assemblies. Factory off-road shocks are typically budget-minded, non-rebuildable units that heat up rapidly during aggressive driving, leading to internal oil foaming, severe dampening fade, and a dangerously unstable ride. At CG ATV & UTV Parts Shop, we supply premium nitrogen-charged piggyback shocks, remote reservoir coilovers, and multi-stage bypass shock assemblies engineered to handle maximum off-road abuse.
Our domestic supply chain carefully manages and pulls from our live warehouse stock, ensuring immediate order verification and fast daily shipping directly to your garage. These high-tier off-road dampers feature micro-polished chromoly shafts, advanced multi-vane valving discs, and external compression and rebound clickers that let you instantly tune your suspension to match shifting trail loads or sand dune conditions. Upgrade your dampening control, maximize wheel travel, and run hard without bottoming out.
Bronco Front Gas Shock Honda Rancher 350 2000-2006
Bronco Front Gas Shock
Fox Factory Performance Series 2.0 QS3 Front Shocks Polaris RZR 900 (50″ / 55″ Width) 2015-2020 [Previously Installed]
Bronco Rear Gas Shock
Fluid Dynamics & Thermal Dissipation: Preventing Dampening Shock Fade
Investing in specialized ATV and UTV shock absorbers introduces high-capacity fluid dynamics to your off-road machine's suspension geometry. When driving over washboards or technical terrain at high speeds, the internal shock piston forces oil through precise shim stacks hundreds of times per minute, converting kinetic energy into thermal energy. In basic factory shocks, this heat causes the internal shock oil to boil and mix with trapped air, creating a foamy mixture that passes through the valving without resistance—a dangerous condition known as shock fade. Performance piggyback or remote reservoir shocks isolate the oil supply from high-pressure nitrogen gas using an internal floating piston (IFP).
The extra oil capacity provided by the external reservoir significantly increases the surface area available for cooling. This stabilizes fluid viscosity and preserves precise compression and rebound dampening, even when the shock body experiences extreme operating temperatures during long-distance desert trail runs.
Direct Live Inventory Sourcing Directory
Coordinate corresponding electronic, safety, and cockpit ergonomics upgrades directly from our available stock:
- Chassis Clearance Enhancements: Achieve proper geometry for your long-travel shocks with a rugged ATV and UTV lift kit assembly.
- Lower Frame Side Rail Armor: Guard your lower shock mounts and suspension links from rocks using heavy-duty rock sliders.
- Cockpit Seating Isolation: Pair your upgraded dampers with high-containment, comfortable ATV and UTV suspension seats.
- Night Trail Visibility Matrix: Spot deep washouts early to set your shock adjustment clicks using high-output driving lights.
- Overhead Cabin Defense: Protect your reservoir brackets and cockpit from elements with a premium aluminum or poly UTV roof.
Preload Adjustment, Dual-Rate Cross-Overs, & Tuning Rules
When setting up your replacement coilovers, always calculate your machine's loaded ride height with passengers and gear on board before adjusting spring preload. Turning the aluminum preload collars down increases initial ride height but reduces down-travel (droop); maintaining a proper balance (typically 30% droop, 70% up-travel) is essential for optimal handling. If your shocks feature dual-rate springs, adjust the cross-over rings to control exactly when the suspension switches from the plush initial tender spring to the stiffer main spring during deep impacts. Use specialized shock oil and clean nitrogen gas when recharging or tuning internal shim stacks. For detailed technical guidelines on fluid shear stability, spring rate metrics, and off-road suspension dynamics, review the engineering papers published by the SAE International Suspension, Steering, and Chassis Technical Committees.